Cafe-Racer SEAT, universal, brown leather, black square-stitching
Product.Nr.: SB-G25
159,00 EUR
incl. 19 % VAT
- weight 1,1 kg
If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.
product description
Beautiful, the highest seat of the Café racer conversion
Universal fits many models.
The base and the cusps are deep-drawn thermoplastic.
Therefore not so stiff as for example Fiberglass. This man gives himself
experience shows that discussions with the auditor about strength and fracture behaviour.
Also, this seat properly saves weight: she weighs only
around 1 kg!
We recommend a mounting on a stable base.
The pad can be very easily with only two screws of the saddle
separated and reassemble.
Color (leather): Brown (black body seams)
Cusps: black (dyed)
Fits with a little craftsmanship sure on many different machines.
Dimensions:
-Length: 600 mm
-Front width: 185 mm (measured on the inside)
-Length of the seat surface: approx. 325 mm
-maximum width rear: 235 mm (measured on the inside)
Other dimensions of this seat on request.
The bench is supplied on request with an opinion of the material.
This as a single bench seat is entered according to TÜV
must be because the seat with their approx. 33 cm length to
is short for the two-man operation.
Important note
Please take note that we retorted, not suitable goods only
full refund without damage .
Therefore make sure the car seat when you place on the frame,
not to damage (E.g. by sharp parts of the frame or by sitting on
without proper installation). Thank you very much!
GB: Cafe racer SEAT, universal, brown leather, black square stitching
Translated from German by
Universal fits many models.
The base and the cusps are deep-drawn thermoplastic.
Therefore not so stiff as for example Fiberglass. This man gives himself
experience shows that discussions with the auditor about strength and fracture behaviour.
Also, this seat properly saves weight: she weighs only
around 1 kg!
We recommend a mounting on a stable base.
The pad can be very easily with only two screws of the saddle
separated and reassemble.
Color (leather): Brown (black body seams)
Cusps: black (dyed)
Fits with a little craftsmanship sure on many different machines.
Dimensions:
-Length: 600 mm
-Front width: 185 mm (measured on the inside)
-Length of the seat surface: approx. 325 mm
-maximum width rear: 235 mm (measured on the inside)
Other dimensions of this seat on request.
The bench is supplied on request with an opinion of the material.
This as a single bench seat is entered according to TÜV
must be because the seat with their approx. 33 cm length to
is short for the two-man operation.
Important note
Please take note that we retorted, not suitable goods only
full refund without damage .
Therefore make sure the car seat when you place on the frame,
not to damage (E.g. by sharp parts of the frame or by sitting on
without proper installation). Thank you very much!
GB: Cafe racer SEAT, universal, brown leather, black square stitching
Translated from German by
Customers also purchased
