product description
Beautiful, the highest seat of the Café racer conversion
Universal fits many models.
The base and the cusps are deep-drawn thermoplastic.
Therefore not so stiff as for example Fiberglass. This man gives himself
experience shows that discussions with the auditor about strength and fracture behaviour.
Also, this seat properly saves weight: weighs only about 1 kilogram!
We recommend a mounting on a stable base.
The pad can be very easily with only two screws of the saddle
separated and reassemble.
Color (leather): Brown (black body seams)
There is an integrated lamp holder in the hump.
The right rear light (order code "RL-ME and RL-MB") is the
Scope of delivery not in!
Fits with a little craftsmanship sure on many different machines.
Dimensions:
-Total length: 700 mm
-Front width: 165 mm (measured on the inside)
-Length of the seat surface: approx. 340 mm
-maximum width rear: 230 mm (measured on the inside)
-Diameter of the backlight: 55 mm
Other dimensions on request.
The bench is supplied on request with an opinion of the material.
This as a single bench seat is entered according to TÜV
must be because the seat with their approx. 34 cm length to
is short for the two-man operation.
Free shipping within Germany!
IMPORTANT NOTE
Please take note that we retorted, not suitable goods only
full refund without damage .
Therefore make sure the car seat when you place on the frame,
not to damage (E.g. by sharp parts of the frame or by sitting on
without proper installation). Thank you very much!
GB: Cafe racer SEAT, universal, brown leather, black square stitching
The taillight is NOT included, but available at our shop: item number "RL-ME" and "RL-MB".
Translated from German by
Universal fits many models.
The base and the cusps are deep-drawn thermoplastic.
Therefore not so stiff as for example Fiberglass. This man gives himself
experience shows that discussions with the auditor about strength and fracture behaviour.
Also, this seat properly saves weight: weighs only about 1 kilogram!
We recommend a mounting on a stable base.
The pad can be very easily with only two screws of the saddle
separated and reassemble.
Color (leather): Brown (black body seams)
There is an integrated lamp holder in the hump.
The right rear light (order code "RL-ME and RL-MB") is the
Scope of delivery not in!
Fits with a little craftsmanship sure on many different machines.
Dimensions:
-Total length: 700 mm
-Front width: 165 mm (measured on the inside)
-Length of the seat surface: approx. 340 mm
-maximum width rear: 230 mm (measured on the inside)
-Diameter of the backlight: 55 mm
Other dimensions on request.
The bench is supplied on request with an opinion of the material.
This as a single bench seat is entered according to TÜV
must be because the seat with their approx. 34 cm length to
is short for the two-man operation.
Free shipping within Germany!
IMPORTANT NOTE
Please take note that we retorted, not suitable goods only
full refund without damage .
Therefore make sure the car seat when you place on the frame,
not to damage (E.g. by sharp parts of the frame or by sitting on
without proper installation). Thank you very much!
GB: Cafe racer SEAT, universal, brown leather, black square stitching
The taillight is NOT included, but available at our shop: item number "RL-ME" and "RL-MB".
Translated from German by
Customers also purchased
