product description
Beautiful, first-class processed seat for the Scrambler conversion,
Universally suitable for many models.
The base frame is deep-drawn from thermoplastic material.
Therefore, it is not as torsionally rigid as, for example, GRP.
Experience has shown that discussions with the examiner about strength and fracture behaviour.
In addition, this bench saves a lot of weight: it weighs only around 1.2 kilograms!
We recommend mounting on a stable base plate.
Find useful tips and tricks for installing the bench
You can find them at www.kickstarter.de under "TIPS"
To mount the bench, 6 threaded bushings are embedded in the substructure.
Colour (artificial leather): black (white check stitching)
We deliberately chose white as the color for the seams.
This has the advantage that you can mark the seam using a permanent marker (or another
Manufacturer of waterproof pens) to the desired (tank) color without any problems.
With a little craftsmanship it will fit many different machines.
Dimensions:
- Total length A: 600 mm
- Width D front: 190 mm (measured on the inside)
- Length C of the seat C: approx. 600 mm
- max. width B rear: 240 mm (measured on the inside)
The seat of this bench rises by approximately 20° at the back.
We will be happy to provide you with further measurements upon request.
The bench can be supplied with a material report on request.
IMPORTANT NOTE
Please note that we only accept returned, unsuitable goods
fully refund without damage .
Therefore, please make sure that the seat is placed on the frame
not to damage it (e.g. by sharp-edged frame parts or by sitting on
without professional installation). Thank you very much!
GB: Cafe-Racer, Scrambler SEAT, universal, black
faux leather, black square stitching
