D.I.Y. REAR FRAME KIT, Ø30mm/245mm, f. BMW K75, K100 and universal use

Product.Nr.: HR-V30

66,39 EUR

    ggf. Artikelbeschreibung beachten!

    ggf. Artikelbeschreibung beachten! ggf. Artikelbeschreibung beachten!
  • delivery time : ca. 1 Werktag
  • weight 5.90 kg

Finanzierung verfügbar ab 99€ bis 5000€
Warenwert

product description

The rear frame kit for the professional or amateur screwdriver.
On this rear frame you can make individual adjustments, such as angle or length changes.
The upper part is already bent, the enclosed pipes and flat iron can be cut to length and welded as required.
So a tail can be built individually according to your own ideas.
The
raw material is very easy to form and weld and is therefore very well suited for changes to the frame and corner piece.
The tube diameter of 30mm corresponds to the BMW K models and is therefore well suited for conversion to K75 and K100.

Dimensions Loop:

- pipe Ø outside: 30mm
- Tube Ø inside: 25mm
- Wall thickness: 2.5mm

- Total length: about 310mm

- Width: about 245mm

Dimensions of the columns:
-
pipe Ø outside: 30mm
- Tube Ø inside: 25mm

- Wall thickness: 2.5mm

- Total length: about 690mm

- Angle of the bend: approx. 40 °
- Length to the bend: about 380mm

- Length from the bend: approx. 370mm

Dimensions of the struts:

- pipe Ø outside: 30mm
- Tube Ø inside: 25mm

- Wall thickness: 2.5mm

- Total length: about 550mm

- Angle of the bend: approx. 90 °
- Length up to the bend: approx. 330mm

- Length from the bend: approx. 370mm

Delivery:
- 1 rear loop

- 2 pipes as supports
- 2 tubes as struts


Manufacturer information on the material used:

EN 10305-3 (formerly DIN 2394-1 / -2) CR1 E195 S3:

CR1: Usually not heat treated but suitable for final annealing (BKM)

EN material E195 (formerly DIN St 34-2)

S3: cold rolled

Application: Automotive industry, mechanical and plant engineering

Rm (N / mm): 374

Rp (N / mm): 358

A%: 39.5

Base: 5.65


GB:
High quality, perfectly weldable, steel tube set from Ø30mm pipe: Frame Loop, t where uprights, two support tubes


Translated by Google