Headlight brackets TOMASELLI style 32-48 mm

Product.Nr.: LH-DL

18,99 EUR

    ggf. Artikelbeschreibung beachten!

    ggf. Artikelbeschreibung beachten! ggf. Artikelbeschreibung beachten!
  • weight 0.75 kg

Finanzierung verfügbar ab 99€ bis 5000€

product description

Classic lamp holder "De Luxe" Tomaselli-style

Ideally suited for conversion to the classic Café racer.

Suitable for stand tube diameter of 32 mm (using the
enclosed cuffs).
Can be used up to a stand pipe diameter up to 48 mm.
In this case, own rubber material thickness must be
be highlighted. The kick starter shop, see the article number
UN-GM a rubber sheet with a thickness of 2 mm. This can be
the desired diameter is usually well realize (stand pipe if necessary)
multiple tape).

Suitable therefore for following motorcycles: Yamaha SR500,.
XS 400 and XS 650, SRX 600, Honda CB 450, 500, CB CB 750
Four, XBR and GB 500 Clubman, Kawasaki Estrella and W 650,.
Z 900 and Z 1000, old English triumph, Norton, BSA,
AJS, Enfield and of course for all other motorcycles with above
Standard tube diameters.

The motorcycle gives the classic and sporty touch.

Length of the arm (measured from the edge of the fork clamp until)
to the center of the hole): approx 85 mm. steel, chrome plated.

Incl. all necessary screws, nuts, washers and
of course also the vibration-resistant rubber cuffs
with 32 mm inner diameter.

GB: Headlamp/headlight holder / bracket
FR: Pattes

Translated from German by Microsoft Translator API