Headlight Brackets TOMMASELLI style Ø32-48mm

Product.Nr.: LH-DL

18,99 EUR

    Bitte Emailbenachrichtigung nutzen (s. unten)

    Bitte Emailbenachrichtigung nutzen (s. unten) Bitte Emailbenachrichtigung nutzen (s. unten)
  • weight 0.75 kg
Finanzierung verfügbar ab 99€ bis 5000€
Warenwert

If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.

product description

Classic lamp holder "De Luxe" in Tommaselli style

Suitable for standpipe diameter of approx. 32mm.
If you replace the supplied cuffs with thinner rubbers, the holders can be up to one
Standpipe diameter of about 48mm can be used.
In the Kickstartershop you will find under the item number UN-GM a rubber plate with a thickness of 2mm.
This allows the diameter to be adjusted very well.

Suitable for the following motorcycles: Yamaha SR500, XS 400 and XS 650, SRX 600, Honda CB 450,
CB 500, CB 750 Four, XBR and GB 500 Clubman, Kawasaki Estrella and W 650, Z 900 and Z 1000, old
Englishman of Triumph, Norton, BSA, AJS, Enfield and of course for all other motorcycles with og
Stanchion diameter.

Gives the motorcycle a classic and sporty touch.

Dimensions:
Length of the boom (measured from the edge of the fork clamp to the middle of the hole): approx. 85 mm
Material: steel, chromed.
Height incl. Cuffs: 70mm
Ø for fixing screws: 8mm
Ø outside of the clamp: approx. 53mm

Incl. all necessary screws, nuts, washers and of course the anti-vibration
Rubber sleeves with 32mm inner diameter.

GB: Headlamp / headlight holder / bracket
FR: Pattes


Translated by Google