Headlight Brackets TOMMASELLI style Ø35-48 mm
incl. 16 % VAT
Classic lamp holder "De Luxe" in Tommaselli style
Suitable for standpipe diameter of approx. 35mm.
If you replace the supplied cuffs with thinner rubbers, the holders can be up to one
Standpipe diameter of about 48mm can be used.
In the Kickstartershop you will find under the item number UN-GM a rubber plate with a thickness of 2mm.
This allows the diameter to be adjusted very well.
Suitable for the following motorcycles: Yamaha SR500, XS 400 and XS 650, SRX 600, Honda CB 450,
CB 500, CB 750 Four, XBR and GB 500 Clubman, Kawasaki Estrella and W 650, Z 900 and Z 1000, old
Englishman of Triumph, Norton, BSA, AJS, Enfield and of course for all other motorcycles with og
Gives the motorcycle a classic and sporty touch.
Length of the boom (measured from the edge of the fork clamp to the center of the hole): approx. 85mm
Material: steel, chromed.
Height incl. Cuffs: 70mm
Ø for fixing screws: 8mm
Ø outside of the clamp: approx. 53mm
Incl. all necessary screws, nuts, washers and of course the anti-vibration
Rubber sleeves with 35mm inner diameter.
GB: Headlamp / headlight holder / bracket