HIGHSIDER HIGHSIDER 7 inch LED headlight RENO TYPE 4, black
Numero prodotto: 223-153
RRP 319,95 EUR
risparmi 5% (16,00 EUR)
incl. 19 % Aliquota d'imposta sul valore aggiunto
descrizione del prodotto
Oval-shaped main headlight comes with a chromed housing for side mount. This model is a highlight for many motorcycles, because of its puristic design and innovative technology.
Inside a chromed reflector with a clear lens is equipped with high-beam, low-beam, parking light and daytime running light (DRL). DRL and parking light are installed in a centre strip and ensure a great light image - low-beam emits above the strip, high-beam below. Reflector emits an asymmetric light flux - approved only for right-hand driving, E-marked.
Our highlights give your bike its unique style! The exceptional design and the perfect technology of the HIGHSIDER headlight series makes you absolutely to a highlight!
Housing diameter: 200 mm
Diameter headlight insert: 178 mm
Housing depth: 160 mm
Hole spacing mounting holes (center - center): 170 mm
Hole spacing from mounting hole to the end of housing: approx. 90 mm
Side mount with M8 mounting bolt
Black = ground
Blue = low beam, current consumption at 12 volt: 1,8A, 22W
Yellow = high beam, current consumption at 12 volt:1,3A, 13W
Black = ground
Red = daytime running light, current consumption at 12 volt: 1,2A, 14W
White = parking light, current consumption at 12 volt: 0,2A, 2,4W
Delivery contents: 1 piece incl. 3-Pin connector
Replacement reflector: LED main headlight insert TYPE 4, chrome, Item No: 226-018
Asymmetric reflector - approved only for right-hand driving.
Customers have to install including 3-Pin connector after mounting reflector
View to plug terminals
High beam (yellow) = right side
Low beam (blue) = on top
Ground (black) = left side