RAM Mounts UNPK RAM goldwing ubolt universal holder
Numero prodotto: 558-UN8
110,66 EUR
RRP 122,95 EUR
risparmi 10% (12,29 EUR)
incl. 19 % Aliquota d'imposta sul valore aggiunto
- peso 1 kg
If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.
descrizione del prodotto
The RAM-Finger-Grip universal mount with brake/clutch reservoir base consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 0.5 inch to 1.25 inch in diameter, double socket arm, diamand adapter base and high strength universal Finger Grip cradle.
The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts.
The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit.
To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The holes centers have a minimum width of 0.94 inch and a maximum of 1.58 inch.
Purchase Includes:
(QTY. 1) Universal Finger Grip cradle
(QTY. 1) Base/ball adaptor (attaches directly to cradle)
(QTY. 1) Standard size double socket arm
(QTY. 1) Mounting base (mounts to either brake/clutch reservoir or rail/handlebar)
(QTY. 1) Hardware for mounting to either brake/clutch reservoir or rail/handlebar
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25 inch
Maximum with Top and Bottom Plates: 6.0 inch
The top and bottom plates can be removed for larger devices.
Dimensions for Short Arm Clamps:
Maximum Depth: 0.75 inch
Minimum Width: 1.25 inch
Maximum Width: 3.0 inch
Dimensions for Medium Arm Clamps:
Maximum Depth: 1.25 inch
Minimum Width: 1.5 inch
Minimum Width: 3.5 inch
Dimensions for Long Arm Clamps:
Maximum Depth: 1.6 inch
Maximum Depth: 2.25 inch
Maximum Depth: 3.5 inch
Material:High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:B Size 1 inch Rubber Ball
Plate Dimensions:2.5W x 5.0H inch
Note:
The U in the part number reflects product packaged in poly bag.
This product can mount to both the brake/clutch reservoir or any round rail that is 0.5 inch to 1.25 inch in diameter.
To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The holes centers have a minimum width of 0.94 inch and a maximum of 1.58 inch.
The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts.
The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit.
To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The holes centers have a minimum width of 0.94 inch and a maximum of 1.58 inch.
Purchase Includes:
(QTY. 1) Universal Finger Grip cradle
(QTY. 1) Base/ball adaptor (attaches directly to cradle)
(QTY. 1) Standard size double socket arm
(QTY. 1) Mounting base (mounts to either brake/clutch reservoir or rail/handlebar)
(QTY. 1) Hardware for mounting to either brake/clutch reservoir or rail/handlebar
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25 inch
Maximum with Top and Bottom Plates: 6.0 inch
The top and bottom plates can be removed for larger devices.
Dimensions for Short Arm Clamps:
Maximum Depth: 0.75 inch
Minimum Width: 1.25 inch
Maximum Width: 3.0 inch
Dimensions for Medium Arm Clamps:
Maximum Depth: 1.25 inch
Minimum Width: 1.5 inch
Minimum Width: 3.5 inch
Dimensions for Long Arm Clamps:
Maximum Depth: 1.6 inch
Maximum Depth: 2.25 inch
Maximum Depth: 3.5 inch
Material:High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:B Size 1 inch Rubber Ball
Plate Dimensions:2.5W x 5.0H inch
Note:
The U in the part number reflects product packaged in poly bag.
This product can mount to both the brake/clutch reservoir or any round rail that is 0.5 inch to 1.25 inch in diameter.
To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The holes centers have a minimum width of 0.94 inch and a maximum of 1.58 inch.