product description
Please note that this article must be ordered for you.
This results in an additional shipping time,
which you can see in the field at the top right (below the price).
This information is subject to change, as it is based on our experience.
or based on the information provided by the supplier or the manufacturer.
We ask for your understanding!
Classic round slide carburettor.
It can't be any purer - the VM offers everything a carburetor must have -
without superfluous gadgets such as heating, accelerator pump, diaphragm
and so forth - and above all simple operation and reliability. Also the perfect
Replacement for defective and no longer available classic carburetors! As a nice gimmick.
it still a tidy plus at achievement (approx.2 - 5 HP, depending upon motorcycle).
Since these carburetors are positively controlled and designed for racing use, they have
no TÜV approval. However, after consultation with the examiner, an entry in the register is certainly not possible.
possible.
You buy two first class models - Made in Japan - here voting for the Yamaha
XS 650, also with 750ccm kit. The carburetors can be fitted with our power air filters or
better K&N filters can be used.
Data:
Choke: left / lever
Standing gas: left
Propeller: right
Petrol supply: left
Dimensions:
Outer diameter front: 40mm
Outer diameter rear: 58mm
Total length: 93mm
dimension middle venturi upwards: 93mm
dimension middle venturi downwards: 76mm
IMPORTANT: the nozzles have been designed to the best of our knowledge and belief, based on
on calculations AND empirical values. Every motorcycle is different - there may be more,
to carry out minor tuning work. Further nozzles are available on request.
Please use only our ORIGINAL MIKUNI tuning kits, no reproductions! For
Possible damages due to incorrect spraying etc. can be caused by the importer and the customer.
reseller shall not be held liable.
Other models: We carry VM carburetors for many other models. Here's just an excerpt:
- Matchless G80CS
- Matchless G80S
- Matchless G85CS 620 ccm
- BMW R75/5
- BMW R100
- BSA A10
- BSA Gold Starling
- BSA B50
- BSA Spitfire 650 ccm
- Hedlund V-2
- Honda CRF 125
- Honda XL 250
- Honda XL 305
- Honda XL 350/400
- Honda CB77
- Honda CB/CJ/CL 360 G/T
- Honda CB/SL/CL 350 K
- Honda CB/CL 450 K
- Honda CB 500 T
- Kawasaki KLX 125
- Kawasaki W 1
- Norton Dominator 600 ccm
- Norton Commando 750
- Norton Mark III
- Norton 850
- Norton 920
- Rotax 450 ccm
- Royal Enfield Bullet 350
- Royal Enfield Bullet 500
- Suzuki DR 125
- Suzuki LS 650
- Triumph 650/750
- Triumph Bonneville 650
- Triumph T120 650
- Triumph Tiger Cub T20
- Triumph Cub Trails
- Yamaha TTR 125
- Yamaha SR 250
- Yamaha SR/XT/TT 400/500
- Yamaha XS 650 (also Big Bore, e.g. 750 ccm)
- Yamaha XS 880
- CZ 125 MX
- CZ 250 MX
- CZ 250-380 MX
- CZ 360 MX
- CZ 380 MX
- CZ 400 MX
- CZ 380 MX
- Hodaka 125 SC Wombat
- Honda CR 250 Elsinore
- Honda CR 250
- Honda CR 400 Elsinore
- HVA model 258
- HVA 125 CR/WR
- HVA 250
- HVA 400
- HVA 390
- HVA 430
- HVA 500 CR
- HVA 500
- Jawa 250 MX
- Yeswa 256
- Jawa 402 MX
- Kawasaki H1A
- Kawasaki H2A 750
- Kawasaki H2B-C 750
- Kawasaki KH250 S1
- Kawasaki KH400 A3
- Kawasaki KH500
- Kawasaki S1
- Kawasaki S1A, S1B
- Kawasaki S1C, KH250 A5
- Kawasaki S2, S2A
- Kawasaki S3, S3A
- Maico 250 MX
- Maico 250 Mega
- Maico 400 MX
- Maico 490 MX
- Villiers Trial 230ccm
- Suzuki 200
- Suzuki RM 250
- Suzuki T 500
- Villiers Trial 230ccm
- Yamaha DT 125 MX
- Yamaha IT 200
- Yamaha 250 MX
- Yamaha IT 465
- Yamaha 465 MX
- Yamaha YZ 125
- Yamaha RD 350
- Yamaha RD 350
- Yamaha RZ 350
- Yamaha TZ350 F/G
We also have tuning kits for tuned models in our program!
Since this article is a custom-made
he is unfortunately excluded from revocation/exchange.
(see AGB).
GB: 2x Mikuni VM36 Carburator for Yamaha XS 650, fits also 750ccm Big Bore
Translated from German by DeepL
This results in an additional shipping time,
which you can see in the field at the top right (below the price).
This information is subject to change, as it is based on our experience.
or based on the information provided by the supplier or the manufacturer.
We ask for your understanding!
Classic round slide carburettor.
It can't be any purer - the VM offers everything a carburetor must have -
without superfluous gadgets such as heating, accelerator pump, diaphragm
and so forth - and above all simple operation and reliability. Also the perfect
Replacement for defective and no longer available classic carburetors! As a nice gimmick.
it still a tidy plus at achievement (approx.2 - 5 HP, depending upon motorcycle).
Since these carburetors are positively controlled and designed for racing use, they have
no TÜV approval. However, after consultation with the examiner, an entry in the register is certainly not possible.
possible.
You buy two first class models - Made in Japan - here voting for the Yamaha
XS 650, also with 750ccm kit. The carburetors can be fitted with our power air filters or
better K&N filters can be used.
Data:
Choke: left / lever
Standing gas: left
Propeller: right
Petrol supply: left
Dimensions:
Outer diameter front: 40mm
Outer diameter rear: 58mm
Total length: 93mm
dimension middle venturi upwards: 93mm
dimension middle venturi downwards: 76mm
IMPORTANT: the nozzles have been designed to the best of our knowledge and belief, based on
on calculations AND empirical values. Every motorcycle is different - there may be more,
to carry out minor tuning work. Further nozzles are available on request.
Please use only our ORIGINAL MIKUNI tuning kits, no reproductions! For
Possible damages due to incorrect spraying etc. can be caused by the importer and the customer.
reseller shall not be held liable.
Other models: We carry VM carburetors for many other models. Here's just an excerpt:
- Matchless G80CS
- Matchless G80S
- Matchless G85CS 620 ccm
- BMW R75/5
- BMW R100
- BSA A10
- BSA Gold Starling
- BSA B50
- BSA Spitfire 650 ccm
- Hedlund V-2
- Honda CRF 125
- Honda XL 250
- Honda XL 305
- Honda XL 350/400
- Honda CB77
- Honda CB/CJ/CL 360 G/T
- Honda CB/SL/CL 350 K
- Honda CB/CL 450 K
- Honda CB 500 T
- Kawasaki KLX 125
- Kawasaki W 1
- Norton Dominator 600 ccm
- Norton Commando 750
- Norton Mark III
- Norton 850
- Norton 920
- Rotax 450 ccm
- Royal Enfield Bullet 350
- Royal Enfield Bullet 500
- Suzuki DR 125
- Suzuki LS 650
- Triumph 650/750
- Triumph Bonneville 650
- Triumph T120 650
- Triumph Tiger Cub T20
- Triumph Cub Trails
- Yamaha TTR 125
- Yamaha SR 250
- Yamaha SR/XT/TT 400/500
- Yamaha XS 650 (also Big Bore, e.g. 750 ccm)
- Yamaha XS 880
- CZ 125 MX
- CZ 250 MX
- CZ 250-380 MX
- CZ 360 MX
- CZ 380 MX
- CZ 400 MX
- CZ 380 MX
- Hodaka 125 SC Wombat
- Honda CR 250 Elsinore
- Honda CR 250
- Honda CR 400 Elsinore
- HVA model 258
- HVA 125 CR/WR
- HVA 250
- HVA 400
- HVA 390
- HVA 430
- HVA 500 CR
- HVA 500
- Jawa 250 MX
- Yeswa 256
- Jawa 402 MX
- Kawasaki H1A
- Kawasaki H2A 750
- Kawasaki H2B-C 750
- Kawasaki KH250 S1
- Kawasaki KH400 A3
- Kawasaki KH500
- Kawasaki S1
- Kawasaki S1A, S1B
- Kawasaki S1C, KH250 A5
- Kawasaki S2, S2A
- Kawasaki S3, S3A
- Maico 250 MX
- Maico 250 Mega
- Maico 400 MX
- Maico 490 MX
- Villiers Trial 230ccm
- Suzuki 200
- Suzuki RM 250
- Suzuki T 500
- Villiers Trial 230ccm
- Yamaha DT 125 MX
- Yamaha IT 200
- Yamaha 250 MX
- Yamaha IT 465
- Yamaha 465 MX
- Yamaha YZ 125
- Yamaha RD 350
- Yamaha RD 350
- Yamaha RZ 350
- Yamaha TZ350 F/G
We also have tuning kits for tuned models in our program!
Since this article is a custom-made
he is unfortunately excluded from revocation/exchange.
(see AGB).
GB: 2x Mikuni VM36 Carburator for Yamaha XS 650, fits also 750ccm Big Bore
Translated from German by DeepL
Customers also purchased
