AIR FILTER, f. 58-62mm carb connections

Product.Nr.: LF-HF60

26,00 EUR
incl. 19 % VAT

  • weight 0,41 kg

If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.

product description

AIR FILTER universal, 58-62mm carburettor flanges

Quality air filter with significantly more airflow than
Original air filter. This tuning filter has a metal mesh on the outside
and a fine paper fabric inside.
Ideal for cafe-racer conversion.

- Overall length: about 165mm
- Length of the filter: about 135mm
- Connection rubber: approx. 35mm
- outer diameter d. Filters: about 120mm
- Dimensions oval part d.Filters about 90mm x 65mm
- inner diameter d. Connection rubbers: approx. 60mm
(This makes this air filter for carburettor flanges of
58-62mm suitable)

The clamp is included.

This air filter fits perfectly on ours
Intake flange LF-KEI for the BMW K-series.

ATTENTION: Due to the higher air flow, the carburetor must
be reconciled, otherwise too lean a mixture
Overheating the engine and causing damage. According to experience
become 4-strokes with about 25-30 numbers larger nozzles
equipped (eg from size 100 to 125 to 130); the nozzle needle
put a ring higher.

For 2-stroke, the nozzle assembly must be even higher.
These are standard values, but the correct candle image is decisive.
This should always be "fawn brown" immediately after full load operation.
This air filter is designed for competition use that
Intake sound gets louder. Therefore usually only in older ones
Year of construction registrable (before about 1983, please clarify with the TÜV).

Translated by Google