Cafe-Racer, Scrambler SEAT, Honda CX500, black leather, white square-stitching

Beautiful, first-class processed seat for the Scrambler conversion,
suitable for the Honda CX 500.

The base frame is deep-drawn from thermoplastic material.
Therefore, it is not as torsionally rigid as, for example, GRP.
Experience has shown that discussions with the examiner about strength
and breaking behaviour. This bench also saves a lot of weight:
It only weighs about 1 kilogram!

The bench can be equipped with a
Material report delivered.

Color
- hump: black
- Artificial leather: black
- Check seams: white
We deliberately chose white as the color for the seams.
This has the advantage that you can mark the seam using a permanent marker (or another
Manufacturer of waterproof pens) to the desired (tank) color without any problems.

Dimensions
- Total length: approx. 620mm
- Width at the front: approx. 170mm (measured on the inside)
- Length of seat: approx. 620mm
- max. width at the back: approx. 215mm (measured on the inside)
- Further dimensions available on request.

Suitable for the following Honda CX models
- Year of manufacture 1978-1981 (standard model)
- Not suitable for CX500C (“Custom” soft chopper, built from 1981),
and “E” (Euro).
- For custom models, the rear frame must
behind the shock absorber mount, then
With a little manual skill, the bench can also be mounted here.
- ATTENTION : To mount this seat (also for standard models)
the rear seat mounting bracket needs to be modified as it is a bit too high.

IMPORTANT NOTE
Please note that we only accept returned, unsuitable goods
without damages . Therefore, please make sure
not to damage the seat when placing it on the frame
(e.g. due to sharp-edged frame parts or by sitting on the bike without proper
assembly). Thank you very much!

GB: Cafe-Racer, Scrambler SEAT, Honda CX500, black leather, white square-stitching