product description
The base and the passenger cover are made of thermoplastic material
deep drawn. So not as torsion-resistant as, for example, GRP. You give for that
Experience has shown that there are discussions with the tester about strength and fracture behavior.
In addition, this seat saves a lot of weight: it only weighs around 1 kilogram!
To mount the bench, 2 threaded bushes and metal brackets are embedded in the substructure.
The pillion cover is attached with 2 screws.
Color (leather): dark brown / vintage (black stitching)
Color (cusp): black
With a little manual skill, it will certainly fit many different machines.
Useful tips and tricks for installing the seat can be found at www.kickstarter.de under "TIPS"
Dimensions
- Total length: 600mm
- Front width: 170 mm (measured on the inside)
- Length of the seat: approx. 600 mm
- max. rear width: 250 mm (measured on the inside)
Other dimensions on request.
After the assembly of this seat, the rear frame extensions are exposed.
For a nicer line, we recommend flexing the same.
A corresponding certificate for the TÜV can be downloaded from www.kickstarter.de under the menu item "Tips".
IMPORTANT NOTE
Please note that we will only provide a full refund for returned unsuitable goods if they are undamaged.
Therefore, please make sure that the seat is placed on the frame
not to be damaged (e.g. by sharp-edged frame parts or by sitting down without professional assembly). Thanks very much!
GB: Cafe-Racer, Scrambler SEAT, SR 500, dark brown leather, black stitching with pillion cover
Customers also purchased
