product description
Universal - sports air filter, available in various sizes
GB: performance air filter, 45-49 mm
FR: filtre à air
Quality - permanent air filter with significantly more air flow than original
or even K & N air filter. Where is the original air filter made of paper,
has a metal mesh outer and a fine weave this tuning filter
in the Interior. Fully washable - oil is eliminated. The metal parts on the
End cap and at the bottom are high-quality chrome plated. Ideally suited to the
Caferacer - or conversion of the chopper.
ATTENTION: By the higher air flow the carburetor needs to be
be adjusted, otherwise a lean mixture the engine overheat
and can lead to damage. Experience has shown that 4 strokes are with approx.
25-30 numbers fitted larger jets (E.g. size of 100 to 125 to 130);
the nozzle needle turn a ring.
The nozzle Assembly must be even higher for 2-strokes.
Are general guidelines, but the right candle image is crucial. This should
immediately be always "Fawn" after full load operation.
This air cleaner is designed for competition use, the intake
Gets louder. Usually only when older years eligible for registration (before approx.)
1983, please clarify with the TÜV).
Available for carburetor flanges in various sizes, E.g. for following motorcycles
suitable:
45-49 mm
HONDA:
CB 250 / CB250 N / RS
CB 400 / CB400 N
KAWASAKI:
KZ 250 / KZ250 A / B
GPz 305 / Gpz305
GPz 400 / GPz400
SUZUKI:
GS 250 / GS250 T / E
GSX 250 / GSX250
GSX 400 / GSX400 / E
GS 400 / GS400
GS 450 / GS450
YAMAHA:
'
DT 250 / DT250 / MX BJ. 76-78
XS 250 / XS250 / SE BJ. 78-81
XS 360 / XS360
XJ 400 / XJ400
Dimensions:
Total length of the filter: approx. 90 mm (ink. Gummi-Anschlußstück)
Maximum diameter at the widest point (lower chrome-plated ring): 74 mm
Scope of delivery including solid, chrome plated clamp.
Translated from German by
GB: performance air filter, 45-49 mm
FR: filtre à air
Quality - permanent air filter with significantly more air flow than original
or even K & N air filter. Where is the original air filter made of paper,
has a metal mesh outer and a fine weave this tuning filter
in the Interior. Fully washable - oil is eliminated. The metal parts on the
End cap and at the bottom are high-quality chrome plated. Ideally suited to the
Caferacer - or conversion of the chopper.
ATTENTION: By the higher air flow the carburetor needs to be
be adjusted, otherwise a lean mixture the engine overheat
and can lead to damage. Experience has shown that 4 strokes are with approx.
25-30 numbers fitted larger jets (E.g. size of 100 to 125 to 130);
the nozzle needle turn a ring.
The nozzle Assembly must be even higher for 2-strokes.
Are general guidelines, but the right candle image is crucial. This should
immediately be always "Fawn" after full load operation.
This air cleaner is designed for competition use, the intake
Gets louder. Usually only when older years eligible for registration (before approx.)
1983, please clarify with the TÜV).
Available for carburetor flanges in various sizes, E.g. for following motorcycles
suitable:
45-49 mm
HONDA:
CB 250 / CB250 N / RS
CB 400 / CB400 N
KAWASAKI:
KZ 250 / KZ250 A / B
GPz 305 / Gpz305
GPz 400 / GPz400
SUZUKI:
GS 250 / GS250 T / E
GSX 250 / GSX250
GSX 400 / GSX400 / E
GS 400 / GS400
GS 450 / GS450
YAMAHA:
'
DT 250 / DT250 / MX BJ. 76-78
XS 250 / XS250 / SE BJ. 78-81
XS 360 / XS360
XJ 400 / XJ400
Dimensions:
Total length of the filter: approx. 90 mm (ink. Gummi-Anschlußstück)
Maximum diameter at the widest point (lower chrome-plated ring): 74 mm
Scope of delivery including solid, chrome plated clamp.
Translated from German by
Customers also purchased
