Description du produit
SHIN YO LED daytime running light with parking light function
The LED daytime running lights with several dozens of power LEDs and parking light function ensure a good perception of bikers by other road users.
Packed in a matt black, rectangular plastic housing, the daytime running light is made for universal mounting.
With this daytime running light, the light switches to dimmed parking light mode (position light) when switching to dipped beam, E-checked.
See and be seen - give your bike personality! The fancy design and the perfect technology of the HIGHSIDER headlight series make you one in any case
Sensational highlight!
Dimensions:
Width: 150 mm
Height: 17 mm
Depth: 37.5 mm
U-holder:
Width holder: 100 mm
Height of holder: 15.5 mm
Depth of holder: 27.5 mm
Thickness: 1.5 mm
Connections: current consumption at 12.5 volts:
black = mass (-)
red = connect to switched plus (ignition 15+)
white = connect control cable to parking light (+)
Scope of delivery: 1 piece
Hints:
Prerequisite is a manually switched dipped beam (light switch), otherwise the function of the TFL would be overridden.
According to the regulations, the TFL must be connected in such a way that it turns off when the main headlamp is switched on.
(Exception: flashers). The rear tail lamp must always remain switched on, i. put on ignition plus. 20.8.14 VE
If more parking lights are available on the vehicle, they must be disconnected, since max. 2 parking lights may be on the vehicle.
Optionally available:
HIGHSIDER DRL CONTROL BOX CB1, daytime running light Control box for vehicles without light switch, 12V Art.-no .: 208-108
Light switch on / off with clamp for handlebar attachment, e.g. Item No .: 240-044
The LED daytime running lights with several dozens of power LEDs and parking light function ensure a good perception of bikers by other road users.
Packed in a matt black, rectangular plastic housing, the daytime running light is made for universal mounting.
With this daytime running light, the light switches to dimmed parking light mode (position light) when switching to dipped beam, E-checked.
See and be seen - give your bike personality! The fancy design and the perfect technology of the HIGHSIDER headlight series make you one in any case
Sensational highlight!
Dimensions:
Width: 150 mm
Height: 17 mm
Depth: 37.5 mm
U-holder:
Width holder: 100 mm
Height of holder: 15.5 mm
Depth of holder: 27.5 mm
Thickness: 1.5 mm
Connections: current consumption at 12.5 volts:
black = mass (-)
red = connect to switched plus (ignition 15+)
white = connect control cable to parking light (+)
Scope of delivery: 1 piece
Hints:
Prerequisite is a manually switched dipped beam (light switch), otherwise the function of the TFL would be overridden.
According to the regulations, the TFL must be connected in such a way that it turns off when the main headlamp is switched on.
(Exception: flashers). The rear tail lamp must always remain switched on, i. put on ignition plus. 20.8.14 VE
If more parking lights are available on the vehicle, they must be disconnected, since max. 2 parking lights may be on the vehicle.
Optionally available:
HIGHSIDER DRL CONTROL BOX CB1, daytime running light Control box for vehicles without light switch, 12V Art.-no .: 208-108
Light switch on / off with clamp for handlebar attachment, e.g. Item No .: 240-044