Beautiful, first-class processed bench for the Cafe Racer conversion,
universally suitable for many models.
The base and the hump are deep-drawn from thermoplastic plastic.
This means that it is not as rigid as, for example, GRP. That's what you give yourself for
Experience has shown that discussions with the tester about strength and fracture behavior.
In addition, this bench saves a lot of weight: It only weighs around 1 kilogram.
We recommend mounting on a stable base plate.
4 threaded bushings are embedded in the substructure for mounting the bench.
Color (leather): black (white seams)
We made a conscious decision to use white as the color for the seams.
This has the advantage that you can cut the seam with an edging (or another
Manufacturer for waterproof pens) can easily be changed to the desired (tank) color.
With a little manual skill, it will fit many different machines.
- Total length: 600 mm
- Front width: 185 mm (measured on the inside)
- Length of the seat: approx. 330 mm
- Max. Rear width: 235 mm (measured on the inside)
Further dimensions on request.
The bench can be delivered with a material certificate on request.
Depending on the TÜV, this bench is registered as a single bench
must be, because the seat with its approx. 33 cm length is too
is short for two-man operation.
Please note that we only returned goods that did not match
Full refund without damage .
Therefore please make sure that the bench is placed on the frame
not to be damaged (e.g. by sharp-edged frame parts or by sitting on
without professional assembly). Many Thanks!
GB: Cafe-Racer SEAT, universal, black leather, white stitching
Customers also purchased