digital CONTROL UNIT, "m.unit blue", MOTOGADGET

Product.Nr.: 361-963

399,00 EUR
incl. 19 % VAT

  • delivery time : Wird bestellt. Lieferbereit in ca. 1-3 Werktagen
  • weight 0,41 kg


product description

Please note that this article must be ordered for you.
This leads to an additional delivery time ,
which you can see in the field at the top right (below the price).
This information is not guaranteed as it is based on our experience
or based on the information provided by the supplier or the manufacturer.
We ask for your understanding!

The new m.unit blue has been further developed compared to the proven previous version

and significantly improved. It now has 12 inputs and 10 outputs,
interchangeable quality cable clamps and especially Bluetooth® LE.
This allows the m.unit blue to be connected directly to our 'm.ride' app on the smartphone.
This functionality is unique in the accessories area for motorcycles.

The entire setup and alarm system can be controlled via the m.ride app.
Error diagnosis is also possible during operation and without removing the m.unit.
A secure, encrypted keyless go function can also be used.

If activated, the approach with your own smartphone is sufficient,
to get the vehicle ready to start. Thus, the on-board voltage with one
Press the start button. Another press will start the engine.
Once switched on, the vehicle electrical system remains safely activated while driving, even without a telephone.

The m.unit blue is the digital control unit for a motorcycle, the heart of the whole
Vehicle electrical systems. It can be operated with push button fittings or with conventional, switching
Handlebar controls are operated. It switches all the necessary components on the vehicle
and at the same time it takes over the tasks of electrical fuses.

Relays and individual components in the wiring harness are greatly reduced and it can be done in the shortest possible time
A new, minimized wiring of the vehicle takes place.

Functions WITHOUT smartphone and m.ride app

  • Complete digital button control, 4-button or 5-button operation possible
  • Complete replacement for the fuse box. 10 independent circuits become digital
    monitored and switched off in the event of faults. After eliminating the fault, the
    Backup function automatically reset
  • Integrated, location-independent alarm system
  • Integrated, digital, load-independent flashing relay, automatic switch-off optional and adjustable,
    m.wave mode selectable
  • Integrated hazard warning system
  • Direction indicators can be optionally set as position lights
  • Parking lights and flasher integrated
  • Control of low and high beam (up to 200 W switching capacity) with just one button
  • Integrated, digital brake light modulator, flashing mode programmable
  • Acceleration-controlled emergency brake light (automatic warning signal)
  • Integrated starter relay for starters with magnetic switch (up to 30 A switching capacity)
  • Intelligent and configurable control / switching off of consumers,
    in order to be able to use the maximum starting energy of the battery during the starting process
  • Integrated, digital horn relay
  • Two configurable additional outputs AUX1 and AUX2
  • Diagnostic function for assignment of input, output, switching status of the circuit,
    Short-circuit diagnosis etc.
  • Calibration and current measurement enables defect detection of all lamps

Functions WITH smartphone and m.ride app

  • Encrypted connection via Bluetooth® LE (Low Energy), thus tamper-proof
  • extremely low power consumption of smartphone and m.unit blue
    (with active Bluetooth 0.9mA and in Powersave mode after 6 weeks of inactivity: 0.3mA)
  • Keyless-Go (vehicle ready to start by approaching it with your own smartphone)
  • highly sensitive acceleration sensor enables the display of your driving activity in
    m.ride through an activity factor, number of curves, top speed, etc.
  • Transmission of alarm events (with date, time, vehicle on the ground etc.) to the app
  • Setting the mode and sensitivity of the alarm system
  • Monitoring the current battery voltage in the app
  • Diagnosis of all inputs and outputs, measurement of currents, voltage, device temperature
  • Defect detection of all lamps through calibration. Defective turn signals
    Flashing frequency doubled, status message in the app and audio notification by Rideassist.
  • Rideassist: optional turn signal sound and error messages in real time as audio output via helmet headset.
  • Manual switching of the outputs via smartphone (except starter)
  • Firmware updates without removal at any location via smartphone and app
  • Configuration of the setup menu without expansion at any location via smartphone and app
  • Vehicle management with automatic information on maintenance tasks, condition of tires,
    Chain, brake pads, oils, operating materials, spark plugs etc. by comparing the
    Vehicle mileage by means of a speedometer signal
  • Logbook records trips and saves all generated vehicle reports,
    Alarm events and maintenance tasks
  • Display of the parking position and ping! to help with vehicle search
  • LIN bus connection available for later connection of suitable motogadget products

Technical requirements

The m.ride app is available for Android (from version 6.0) in the Playstore.
The version for iOS will follow shortly. For coupling the m.unit blue with the smartphone
the modern Bluetooth LE is used.
This requires certain requirements for the smartphone's hardware.

The following Android models are currently compatible

Samsung Galaxy S7 / S7 Edge

Samsung Galaxy S6 / S6 Edge
Samsung Galaxy Tab A (2016)
Samsung Galaxy Tab S2 10.5
Google Pixel / Pixel XL
Google Nexus 5
Google Nexus 5X
LG G4
LG G5
Sony Experia Z3 Compact
OnePlus 3 / OnePlus 3T
Huawei P9 / P9 Plus

Further information about the app can also be found at mride.de or in Google Play

scope of delivery

  • m.unit blue
  • approx. 50 cm connection cable for battery positive pole with 10 mm² cross section
  • 2 cable eyelets
  • 1 x M5 stainless steel screw
  • 2 x M5 stainless steel screw with nut
  • 1 x speedometer sensor with 2 magnets
  • Detailed installation and operating instructions

Technical specifications

L / W / H 90 x 53 x 30 mm, hole spacing 74 mm
Weight approx. 180 g
attachment 2 x M5 stainless steel screws (assembly and earth connection), 1 x M5 screw contact for battery plus
operating voltage 6 V - 20 V
operating temperatur -20 ° ... + 80 ° C
inputs 1 x input (+ 12V switched) for ignition lock or m.lock

11 x control input (minus / ground switched) for:
left blinker
right blinker
Low / high beams
starter
horn
stoplight
Kill switch
stand switch
LIN bus
AUX1
AUX2
outputs 10 x output (+ 12V) for:
left blinker
right blinker
dimmed headlights
high beam
starter
horn
stoplight
ignition
AUX1
AUX2



Free shipping within Germany


Translated by Google