Frame LOOP, long, Ø22mm (7/8 inch)/190mm, universal
Product.Nr.: BU-GER
19,00 EUR
RRP 34,80 EUR
you save 45.4% (15,80 EUR)
incl. 19 % VAT
- weight 1,2 kg
If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.
product description
Long rear bar made of brushed quality steel.
This loop has a 180 degree curvature.
This loop can be used universally for all
Motorcycle frame with equal dimensions. Please compare
the dimensions before installation and pay special attention to
on pipe distance and outer diameter of the pipes.
Mounting the frame brackets and/or cutting off the original frame
requires a TÜV approval. The screwing to an unmodified
Original frame, however, not
dimensions
total length: approx. 520 mm
inner diameter (tube): approx. 18 mm
outer diameter (tube): approx. 22 mm
front outer width: approx. 209 mm
Pipe distance (measured from pipe centre to pipe centre): approx. 190 mm
material thickness: approx. 2 mm
Translated from German by DeepL
This loop has a 180 degree curvature.
This loop can be used universally for all
Motorcycle frame with equal dimensions. Please compare
the dimensions before installation and pay special attention to
on pipe distance and outer diameter of the pipes.
Mounting the frame brackets and/or cutting off the original frame
requires a TÜV approval. The screwing to an unmodified
Original frame, however, not
dimensions
total length: approx. 520 mm
inner diameter (tube): approx. 18 mm
outer diameter (tube): approx. 22 mm
front outer width: approx. 209 mm
Pipe distance (measured from pipe centre to pipe centre): approx. 190 mm
material thickness: approx. 2 mm
Translated from German by DeepL
Customers also purchased
