SWITCH CONTROL for 22mm (7/8 inch) handlebars, mo.switch mini by Motogadget, black anodized aluminium
Product.Nr.: MG-SMB7
129,00 EUR
incl. 19 % VAT
- weight 0,41 kg
If you can't put this article into the shopping cart, we will inform you when the article is available again. Please enter your e-mail address and confirm the incoming mail. Thanks.
product description
Please note that this article must be ordered for you.
This results in an additional shipping time,
which you can see in the field at the top right (below the price).
This information is subject to change, as it is based on our experience.
or based on the information provided by the supplier or the manufacturer.
We ask for your understanding!
The m.switch mini is a universal, small probe for handlebars with 22mm (7/8 inch)
Tube diameter in an attractive look.
Very small and narrow but very concise due to the elaborately manufactured contrast-cut.
The housing, milled from the solid material, is first anodized and then milled over the edges.
3 miniature keys with a defined pressure point are recessed in recesses,
which give the thumb the necessary orientation. The push buttons are protected against
Splash-proof and very robust design.
The individual strands are also already soldered ready for operation and sealed watertight.
All that remains is to drill a hole for the thin cable in the handlebar.
With a cable length of two metres, there are sufficient reserves for installation.
The two halves of the housing are fixed against each other with two stainless steel screws.
and fit 22mm (7/8 inches) diameter handlebars.
If there is not enough space on the right side of the handlebars due to a large throttle grip
is available for one m.switch mini, two push-button housings can also be mounted on the left-hand side.
handle can be mounted. The six buttons and the symmetrical milling results in
a special eye-catcher.
The m.switch mini together with the m.grip aluminium handles or the rubber handles m.grip soft
as well as the handlebar end indicators m.blaze disc and the rear view mirror m.rear a super
stylish handlebar pattern. This modular and high-quality handle/fitting indicator system
decorates the Cafe Racer just like any other handlebar.
In combination with an electronic push-button control (not included)
these beautiful CNC-manufactured fittings can be used with all electrical units such as
e.g. light, indicators, electric starter, horn and much more.
scope of supply
1 m.switch mini aluminium housing
3 integrated high-quality buttons per unit
Mounting screws made of stainless steel M5
Technical Specifications
Inner diameter 22mm (7/8")
Outer diameter 45 mm
Width 14 mm
Free delivery within Germany
Translated from German by DeepL
This results in an additional shipping time,
which you can see in the field at the top right (below the price).
This information is subject to change, as it is based on our experience.
or based on the information provided by the supplier or the manufacturer.
We ask for your understanding!
The m.switch mini is a universal, small probe for handlebars with 22mm (7/8 inch)
Tube diameter in an attractive look.
Very small and narrow but very concise due to the elaborately manufactured contrast-cut.
The housing, milled from the solid material, is first anodized and then milled over the edges.
3 miniature keys with a defined pressure point are recessed in recesses,
which give the thumb the necessary orientation. The push buttons are protected against
Splash-proof and very robust design.
The individual strands are also already soldered ready for operation and sealed watertight.
All that remains is to drill a hole for the thin cable in the handlebar.
With a cable length of two metres, there are sufficient reserves for installation.
The two halves of the housing are fixed against each other with two stainless steel screws.
and fit 22mm (7/8 inches) diameter handlebars.
If there is not enough space on the right side of the handlebars due to a large throttle grip
is available for one m.switch mini, two push-button housings can also be mounted on the left-hand side.
handle can be mounted. The six buttons and the symmetrical milling results in
a special eye-catcher.
The m.switch mini together with the m.grip aluminium handles or the rubber handles m.grip soft
as well as the handlebar end indicators m.blaze disc and the rear view mirror m.rear a super
stylish handlebar pattern. This modular and high-quality handle/fitting indicator system
decorates the Cafe Racer just like any other handlebar.
In combination with an electronic push-button control (not included)
these beautiful CNC-manufactured fittings can be used with all electrical units such as
e.g. light, indicators, electric starter, horn and much more.
scope of supply
1 m.switch mini aluminium housing
3 integrated high-quality buttons per unit
Mounting screws made of stainless steel M5
Technical Specifications
Inner diameter 22mm (7/8")
Outer diameter 45 mm
Width 14 mm
Free delivery within Germany
Translated from German by DeepL
Customers also purchased
